Skip to main content

LED Outdoor

pictureGallery120

The Adidas company needed a large, impressive video wall for its headquarters in Herzogenaurach. Due to the structural conditions and a 25 m deep porch, a torsion-free housing was developed for this special case.

This was set up in the parking lot in front of it and all the technology was installed there. The entire LED wall was then lifted to its destination at once using a heavy-duty crane and anchored accordingly.

LED Outdoor

Outdoor LED displays are usually manufactured as P4, P5, P6, P8, P10, P12, P14, P16, P18, P20, P25 or P30 full color versions (the respective number indicates the pixel pitch in mm).

But they are also available in monochrome. Installation takes place on scaffolding, pylons or directly on house facades. The front sides of our outdoor displays are generally designed IP-65, which means that no further protective measures such as glass panes are necessary.

For critical installations - e.g. near the sea - we can build additional protective housings to ensure comprehensive protection against salt water.

Nickel-plated steel is used to build pylon solutions. After good preparation and planning, inserting the displays and putting them into operation is easy and problem-free.

LED walls for advertising are only supplied with a light sensor, so that the brightness of the display is automatically adjusted to the ambient light.

In the example shown you can see a P25 display in outdoor use. It is protected against all weather influences such as snow, rain or heat. In addition, particular attention was paid to security against vandalism and easy service accessibility.

The VICOM LED displays are mounted directly on the facade using a special wall bracket. The images are bright and lively and therefore ideal for advertising. The production of this LED display is particularly inexpensive because the wall bracket was already taken into account in the design and essentially standard elements could be used.

LED displays for flexible rental use must meet special requirements. On the one hand, they must be practical and light, so that quick assembly is guaranteed. On the other hand, they must be adjustable and hanging so that customer requirements can be completely met. They have to be very robust, because in the rough everyday life of staging, forces have to be able to withstand without causing damage.

Contact

Contact VICOM